Split Body Ball Valve

INTRODUCTION

These types of valves are being used for natural gas pipeline pig stations, compressor and measuring stations, RMS Pressure Regulating and measuring stations and above ground applications. Conformity to MR0175 requirements and PSL2 level can be obtained upon request and can be manufactured with different materials.

Valves are manufactured with full port or reduced port. Bore diameters comply with API 6D standards.

STANDARDS

  • Design API 6D, ISO 14313, ASME B16.34
  • Face to Face size ASME B16.10
  • End Type ASME B16.5 & B16.47 & ISO 7005
  • Test and Inspection API 598
  • NACE MR0175
  • Fire safe valve design. Design verification through tests and certificates according to API 6FA and ISO 10497 standards.

FEATURES

  • Split Body (SB)
  • Forged Steel (FS)
  • Cast Steel (CS)
  • Double Block & Bleed (DBB)
  • Trunion Ball (TB)
  • Emergency Sealant Injection (Stem & Seat)
  • Anti-Static Device (ASD)
  • Above Ground (AG)
  • Full Bore (FB) or Reduced Bore (RB)
  • Fire Safe Design (FSD)
  • Body Drain & Vent
  • Blow-Out Proof Stem
  • Flanged End (RF, RTJ)

TECHNICAL DATA

  • Product Range: NPS 02”-56” (DN 50-DN 1400)
  • Pressure Class: #150/#300/#600/#900/#1500/#2500
  • Standard Temperature: -29°C to 85°C (Special versions for service outside this range on request)

OPERATORS

  • Lever Operated
  • Gearbox (GB)
  • Electric Actuators (EA)
  • Spring Return Pneumatic Actuator (GC)
  • Gas Over Oil Actuators (GO)
  • Safety Shut Off Valve Actuator (GS)

INTRODUCTION

These types of valves are being used for natural gas pipeline pig stations, compressor and measuring stations, RMS Pressure Regulating and measuring stations and above ground applications. Conformity to MR0175 requirements and PSL2 level can be obtained upon request and can be manufactured with different materials.

Valves are manufactured with full port or reduced port. Bore diameters comply with API 6D standards.

STANDARDS

  • Design API 6D, ISO 14313, ASME B16.34
  • Face to Face size ASME B16.10
  • End Type ASME B16.5 & B16.47 & ISO 7005
  • Test and Inspection API 598
  • NACE MR0175

FEATURES

  • Split Body (SB)
  • Cast Steel (CS)
  • Anti-Static Device (ASD)
  • Above Ground (AG)
  • Full Bore (FB) or Reduced Bore (RB)
  • Body Drain & Vent
  • Flanged End (RF, RTJ)

TECHNICAL DATA

  • Product Range: NPS 01”-08” (DN 25-DN 200)
  • Pressure Class: #150/#300
  • Standard Temperature: -29°C to 85°C (Special versions for service outside this range on request)

OPERATORS

  • Lever Operated
  • Gearbox (GB)
  • Electric Actuators (EA)
  • Spring Return Pneumatic Actuator (GC)
  • Gas Over Oil Actuators (GO)
  • Safety Shut Off Valve Actuator (GS)